Biasi Boiler Problems BIASI Boiler Problems?
BIASI boiler problems? - biasi boiler problems
Tonight, he was with the work that happened before, but began to work again. I have no idea what to do. the signal is flashing slowly, and when I run the water hot flashes faster, but the flame is not. Please help
|
3 comments:
Depending on the nature of the boiler must be a source of ignition for the pilot to either ignition or hot surface ignition and some have a standing pilot. If you have a flame control panel, close to where the pilots. This contamination by an accumulation of carbon must be cleaned once a year. Find and use steel wool or fine sandpaper and wipe the surface. This should solve your problem. I hope this helps if not specified
Depending on the nature of the boiler must be a source of ignition for the pilot to either ignition or hot surface ignition and some have a standing pilot. If you have a flame control panel, close to where the pilots. This contamination by an accumulation of carbon must be cleaned once a year. Find and use steel wool or fine sandpaper and wipe the surface. This should solve your problem. I hope this helps if not specified
A model of the boiler would be a great help for the problem of reducing
Post a Comment